Leak Sealer

Leak Sealer

Leak Sealer Directions:
For use in indirect systems only.

  • For open vented systems fill via header tank.
  • For sealed systems fill via a radiator.

Instructions:
Shake bottle before opening and use entire contents. Suitable for use with Power Flushing machines, dose via the reservoir.
For open vented systems, dose via the Feed/Expansion tank. Switch on

the heating system and bleed radiators as necessary. After completion of treatment, peel installation label from side panel and attach to boiler casing. Record date for future reference.

Technical Information:
Leak sealer can eliminate damp patches under screed avoiding costly repairs. Add Leak Sealer to the central heating circuit. Leak Sealer is effective within 1 – 24 hours when a soft seal will form. One litre is usually sufficient to seal a typical domestic central heating system comprising 10 radiators. Compatible with all Corgi central heating products. Corrosion protection must also be carried out by adding inhibitor.

Each 1 litre container of Leak Sealer is usually sufficient for a standard domestic heating system up to 100 litres (approx 10 radiators). It is acceptable to add Corgi Silencer, Inhibitor and Leak Sealer to the system and leave indefinitely.

Product Code: TRIPX005-C

CORGI Controls helps to fund the Gas Safety Trust, the UK’s leading Carbon Monoxide research Charity.
Copyright © 2019 Corgi Controls